Painter Acrylic Turbo 310ml (white)

Features:

• Plastoelastic

• Color fast after curing

• Odorless

• Can be used indoors and outdoors

• GEV-EMICODE® EC 1Plus - very low emissions

• Solvent- and silicone-free Phthalate-, chloroparaffin- and halogen-free

• Low shrinkage

• High adhesion

Processing advantages:

• Very well smoothable with water

• Easy to process

• Good dosability

Fields of application:

• Sealing of connection joints in construction

• Filling cracks and holes in walls and ceilings

• Joints between stairs and walls, ceilings and walls, at window sill connections and in gas concrete constructions

• Excellent adhesion to many building materials such as concrete, plaster, masonry, cement, wood, rigid PVC, plasterboard, fiberboard, etc.

Processing:

Adhesive surfaces must be load-bearing, dry, free of dust, wax and grease, clean with beko Allclean if necessary. Widen cracks to form a wedge. In the case of highly absorbent substrates, pre-treat with a mixture of water and beko Maler-Acryl Turbo (5:1). Fill the joints thoroughly and without air pockets. The joints can be smoothed with damp tools (e.g. beko Fugenspachtel-Set). As long as the material has not hardened, the joint must be protected from moisture, frost and dirt. For optimum joint dimensioning, observe IVD Leaflet No. 27, Section 8.1. beko backfill material should be used to prevent three-sided adhesion. Preliminary tests must be carried out prior to application and recoating. Any product liability is excluded in case of non-professional and improper application. For professional or industrial use only.

Notes:

Connection joints < 2 mm can be painted over immediately after skin formation. Not suitable for expansion joints and in areas of heavy water accumulation. Due to the wide range of paint and varnish qualities, a compatibility test is recommended before overpainting. Paint must be elastic enough to allow application on a plasto-elastic sealant (water-based or synthetic). Minimal risk of paint cracking.