Homematic IP Wired switch actuator - 8-fold

The Homematic IP Wired switch actuator - 8-fold is part of the Homematic IP smart home system and switches connected loads via eight potential-free, independent channels.

The maximum switching capacity is up to 3680 W, this varies depending on the assignment of the channels. Two channels can be loaded with up to 16 amps resistive load, while the remaining six channels, with this assignment, can switch a maximum of 8 amps resistive load. Alternatively, all eight channels can be loaded with a maximum of 10 amps resistive load per channel. It should be noted that the maximum switching capacity also depends on the type of load used. The maximum permissible switching capacity can be found in the product data sheet.

The screwless connection of the bus lines is made by easy-to-use spring-loaded terminals and prefabricated bus cables with MOLEX Ultra-Fit connectors. The standby energy consumption of the Homematic IP Wired switching actuator is a particularly low 60 milliwatts.

A Homematic IP Wired Access Point is required to operate the switch actuator. When using a Homematic IP Wired input module, the connected lamps can be operated via conventional wired pushbuttons. The combination with Homematic IP wireless pushbuttons or remote controls is possible via the smart home central CCU3 and in the future alternatively via the cloud solution with the Homematic IP Access Point (free app control).

For example, on the construction site, commissioning and operation can also be performed directly on the device without an Internet connection. For this purpose, the Homematic IP Wired switch actuator offers a large, illuminated display and buttons directly embedded in the housing