Auto-K Zinc-Aluminum Spray Basic silver-grey 400ml

Auto-K Zinc-aluminum spray is particularly suitable as corrosion protection for structures exposed to water and weathering. Ideal for repairing damaged zinc surfaces and for coating inner sheet edges during spot welding. Can be used on heating systems, pipelines, steel structures, radiators, railings, crash barriers, etc. Note: Do not spray on surfaces coated with synthetic resin, as the paint may lift.

Product details:

• Color: silver-grey
• Corrosion protection for structures exposed to water and weathering
• For repairing damaged zinc surfaces
• Coating of inner sheet edges during spot welding
• Contents: 400 ml
• for heating systems, pipelines, steel structures, radiators, railings, etc.
• Fast drying, very economical
• good chemical resistance
• Binder base: acrylic resins
• Spray application: 30-40 µm with 2 cross coats
• Drying times: dust-dry after 5-10 minutes, touch-dry after 30-40 minutes, completely dry after 24 hours
• Recoatable: with itself: after approx. 10 minutes, with all Auto-K paints, first check on a test piece whether the zinc-aluminum layer can be painted over with the desired top coat
• No pre-treatment with primers and no post-treatment with further top coats and clear coats necessary

Signal word:Danger

Toxic to aquatic life with long lasting effects.

H319 Causes serious eye irritation.

H336 May cause drowsiness or dizziness.

H222 Extremely flammable aerosol.

H229 Pressurized container: may burst if heated.

Do not pierce or burn, even after use.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.

P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F.

P102 Keep out of reach of children.

P271 Use only outdoors or in a well-ventilated area.

P312 If you feel unwell, call a POISON CENTER/doctor.

P103 Read all instructions carefully and follow them.

P391 Collect spillage

P101 If medical advice is needed, have product container or label at hand.

P211 Do not spray on an open flame or other ignition source.

P273 Avoid release to the environment.

P337+P313 If eye irritation persists: Get medical advice/attention.

P501 Dispose of contents/container in accordance with local/regional/national/international regulations