Auto-K Fine filler + hardener 250g

The Auto-K fine filler can be used to achieve smooth, non-porous surfaces on plastic, metal and ceramic parts. It adheres excellently to roughened, dry surfaces, is easy to apply and sand and hardens without cracking or shrinkage. The fine filler is enriched with fine fillers and can also be used as a filler layer over glass fiber filler. Note: Do not return mixed filler to the can. Please clean used tools (spatula blade, mixing cup, etc.) immediately after finishing work (e.g. with acetone/nitro thinner).

Product details:

• for smooth, non-porous surfaces made of plastic, metal, etc.
• Excellent adhesion on roughened, dry surfaces
• can also be used as a filler layer over glass fiber filler
• good adhesion
• Contents: 250 g
• with hardener
• easy processing
• Sanding and hardening without cracking or shrinkage
• Working time: approx. 5 minutes
• Mix the filler with 2 % hardener in the plastic lid until a homogeneous mass is formed

Signal word:Warning

May cause damage to organs through prolonged or repeated exposure.

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H361d Suspected of damaging the unborn child

H226 Flammable liquid and vapor.

H319 Causes serious eye irritation.

Do not breathe dust/fume/gas/mist/vapor/aerosol.

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash skin with water [or shower].

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing.

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read all instructions carefully and follow them.

P501 Dispose of contents/container in accordance with local/regional/national/international regulations