Ammonit grout RUSTICAL gray 15 kg

The Ammonit Stones grout mortar RUSTICAL in gray is ideally suited for grouting artificial stones, facing stones, natural stones, and clinker. Due to its water and frost resistance, the grout can be used both indoors and outdoors. Measure the desired amount of water in a clean container and mix it with the corresponding amount of Rustical grout mortar until a homogeneous consistency is achieved. Mix again after about 3 minutes. Apply the grout without dirtying the facing stones. About 2 minutes after application, remove the excess grout mortar and fully level and smooth the joint (e.g., using a joint spatula). You should shape the final appearance of the joint surface with a brush. Subsequent corrections to the joint may lead to discoloration. If the tiles are dirty, they should not be cleaned with a damp sponge or cloth. The working time of the grout mortar from the mixing with water must not exceed 15 minutes. The curing time of the joints depends on the type of tiles, the width of the joints, as well as the humidity and temperature of the environment and the substrate.

Product details:

• Application area: Indoor and outdoor
• Field of application: Wall
• Joint width: no restrictions
• Color: gray
• Content: 15 kg
• Mixing ratio: approx. 1.8 l water/ 15 kg
• Processing temperature: +5 °C to +20 °C
• Processing time: 15 to 20 minutes
• Walkable after: 24 hours
• Consumption: approx. 3-5 kg/ m² (depending on the application area)
• Use: Grouting artificial stone facings, natural stone, and clinker stones
• Additional properties: elastic, increased adhesion, resistant to weather influences
• Manufacturer information: Stegu sp. z o.o. | ul. Dworcowa 8 | 46-024 Jelowa, Poland | eMail: info.export@stegu.pl | Manufacturer no. ST-F-R15-003-TH