Schmincke Modeling paste 300ml ►GROB◄

Acrylic Modeling Paste ►GROB◄

Acrylic paste of tight pasty consistency. Dries white with a coarse surface. For texturing, modeling designs especially on rigid substrates, such as priming wood. Ideal for the granulating technique.

• Content: 300ml
• Color: white
• suitable for acrylic painting

Processing instructions

• Stir briefly before use if necessary.
• Modeling Paste, fine is adjusted ready for use and is best applied pure or mixed with acrylic paints with a spatula or similar on a grease-free surface. (Paste has a lightening effect!).
• If layers thicker than 1 cm are desired, they should definitely be applied gradually.
• The drying process is strongly dependent on the layer thickness and takes several minutes to several hours.
• The dried textures can be finished with very fine sandpaper or a knife and can be painted over with acrylic paints.
• The product is water-miscible, but dries insoluble in water.
• Clean tools immediately after use with water or soap and water. Acrylic paints that have already dried can be removed with Brush Cleaner (50051 / 50052).
• The product should not be used below 10 °C object and room temperature.
• Close container immediately after use.
• Store in a cool and dry place.
• Protect from frost.
• Individual pre-tests are recommended.

Ingredients: Pure acrylic dispersion, pigments, fillers, additives, water.

Note: Contains biocidal products BIT, CIT, MIT, OIT. May cause allergic reactions. Dispose of empty only.