Homematic IP Wired switch actuator - 4-fold

The Homematic IP Wired switch actuator - 4-fold is part of the Homematic IP smart home system and switches connected consumers via four potential-free, independent channels.

The maximum switching capacity is up to 3680 watts per channel and can vary depending on the type of load. While the relays may be loaded with 1500 W when incandescent lamps or HV halogen lamps are connected, for example, the value is reduced to 200 W for lamps with internal ballast (LEDs/compact fluorescent lamps). In addition to lamps, electric radiators and other electric heating systems with resistive loads can also be switched via the Wired switch actuator. In this case, the relays may be loaded with 8 A each. The maximum permissible switching capacity can be found in the product data sheet.

A Homematic IP Wired Access Point is required to operate the switch actuator. When using a Homematic IP Wired input module, the connected lamps can be operated via conventional wired pushbuttons. The combination with Homematic IP wireless pushbuttons or remote controls is possible via the smart home central unit CCU3 and in the future alternatively via the cloud solution with the Homematic IP Access Point (free app control).

For example, on the construction site, commissioning and operation can also be performed directly on the device without an Internet connection. For this purpose, the Homematic IP Wired switch actuator offers a large, illuminated display and device buttons.

The screwless connection of the bus lines is made by easy-to-use spring-loaded terminals and prefabricated bus cables with MOLEX Ultra-Fit connectors. The standby energy consumption of the Homematic IP Wired switch actuator is a particularly low 60 milliwatts.