Close Parent, Pop in, bamboo cloth diaper, V2 generation, 5 - 15kg, snaps, color: Tiger

* Onesize, grows from approx 5 - 15kg
* press studs
* double leg cuffs for extra leakage protection
* Puffin pattern with organic laminate content

The popular Pop-in V2 diaper now with Druckies instead of Velcro!

The diaper from Pop-in combines optimal absorbency with fashionable colorful design in one-size. The diaper is adjustable in waist size due to the snap fastener. The waist height is adjusted via press studs on the front - so a total of four sizes are possible.

From now on the beautiful Puffin pattern is available: In addition to the great print, the special thing about Puffin is that the PU layer of the diapers consists of 20-30% renewable vegetable materials. This helps Pop-in to conserve non-renewable energy sources and reduce greenhouse gas emissions. In addition, Puffin diapers are made from recycled materials: 2.5 plastic bottles were recycled for the outer layer of each diaper.

The absorbent, large liner and booster are attached to the waterproof outer diaper with snaps. So they do not slip and can even be replaced with a new Set insert if only partially soaked.

The diaper ensures a snug fit at any age with stretchy and double leg cuffs. The inner cover is made of soft and absorbent viscose (bamboo). The diaper thus does not wear so much and your baby is noticeably "slimmer".

The insertSet of Pop-in can be exchanged for a fresh one if the insert is not completely soaked. The inside of the outer diaper is lined with polyester including a mini absorbent core, which also gets wet when the absorbent core is wet. That's why this diaper is more like an all-in-one diaper to use. So if a toddler pees in the diaper several times during three hours, the soaker liner and outer cover will most likely have to go into the wash together.

If you're looking for a system where you can reuse the overpants over and over, check out Pop-In's overpants. You can fit these with all sorts of absorbent pads to customize your diaper to your liking.

Also available in the same patterns: Pop-in AIO with Velcro, overpants with Velcro, bibs and child seat protectors.

Care instructions:
Washable up to 60°C.
The inserts are tumble dryable, the outer diaper is not.
It is advisable to separate the insert from the outer cover before washing. The weight of the wet insert can pull on the rubbers of the outer cover, especially when drying, and wear them out over time.
High heat can damage the PUL! Avoid drying the outer cover on the heater or hanging it in the blazing sun for a long time.
Please avoid detergents with enzymes, their action reduces the life of cloth diapers, especially bamboo fabrics.

Material:
Outer cover: 100% polyester (coated with polyurethane).
Absorbent core & booster wear layer: 70% viscose (from bamboo), 30% cotton
Absorbent core & booster base layer: 100% polyester